The maintenance work of the constant temperature and humidity test chamber is indispensable. We all know that only the maintenance of the equipment can ensure that the equipment does not malfunction during the use, so we must pay attention to the details, so many The customer does not know how to clean and maintain the waterway system. The waterway system is related to the humidification and dehumidification process of the equipment. Therefore, it is essential for the daily maintenance of the waterway system. Next, I will tell you some tips on maintenance. 1. Open the machine room door of the constant temperature and humidity test chamber, close the main power supply, rotate the position of the drain valve, and drain the water back to the lower water tank through the return pipe. 2. The return pipe is pulled out, the water motor power cable connector and the pumping motor outlet pipe are pulled up, and the pump motor outlet will have water leaking out as a normal phenomenon. Please press the pump motor water outlet to quickly pour the water in the bucket. Drop it. 3. After cleaning all the components, place the lower bucket to the position of the return hose pump motor power cable connector, and the pumping motor outlet pipe. With the above knowledge, when you clean and maintain the water system of the constant temperature and humidity test chamber, you don't have to worry about it. Finally, experts recommend that you learn to test these instruments after purchasing the equipment. We must know that The calibration method of different equipment may be slightly biased. We still need to use the correction method provided by the merchant. Learning to operate the self-test calibration method of the equipment can save a lot of trouble for the enterprise itself, and the customer is also convenient to use. Shijiazhuang Asa Technology Co., Ltd. , https://www.asaantiwrinkle.com
The trick of cleaning the constant temperature and humidity test chamber waterway system