Compact Toilet Paper,Jumbo Roll Of Toilet Paper,Portable Toilet Paper,Toilet Paper Roll DONGGUAN YEE HUP TRADING CO,.LTD , https://www.dgyeehupack.com
printing sequence
from left to right
printing units
9
Driving system
electronic line driving system
max. printing speed
300m/min(plate cylinder diameter≥Φ170mm)
actual printing speed depends on used in the properties and thickness uniformity of the base material, solvent properties, ink layer thickness, ink features, etc
unwind diameter
Φ800mm
rewind diameter
Φ800mm
film width
600mm~1050mm
paper core
Φ76×Φ92mm
film roll holding form
safety disc type gapless air expending shaft
min. film roll changing diameter
Φ200mm
register accuracy
longitudinal≤±0.1mm(auto)
Horizontal ≤ ±0.1mm(auto)
the characteristic of film will effect the register accuracy
tension control range
3~25kg(full width accuracy)
tension control accuracy
±0.3kg
printing impression
380kg
hardness of rubber roller
Shao Er(A)70°~75°
plate cylinder diameter
Φ120mm~Φ300mm
plate cylinder length
800mm~1150mm
doctor blade oscillation
±5mm
air impression
0.6Mpa≤P≤0.8Mpa
heating method
electricity
oven temp.
Max.80ºC(room temp. 20ºC)
temp. control accuracy
±2ºC
film length in oven
About 1.9m  last unit 2.2m
hot wind speed in from wind nozzle
Max.28m/s
hot air reuse rate
0~50%
hot wind fan power
7.5kw
length between units
1.6m
compressed air source impression
0.6Mpa≤P≤0.8Mpa
material to print
PET:12~60μm         BOPP:15~60μm
OPP:20~60μm        CPP: 20~60μm
NY: 15~60μm         PE   35~100μm
power
3 phase,50Hz,380V(±10V)
This machine is our 3rd generation especially for water based ink printing. And also suit for solvent base ink printing. It will help us to control the VOCs release from the very begining if we use the water based ink to print.
This is the machine in the Chinapas in Guangzhou 2017.
Why we use water based ink printing machine? Good for health and Environmental protection!!!
This machine is the new designed rotorgavure printing, especially for water based ink printing. We have research and developed water based ink printing for many years and this model is the 3rd generation water based ink rotogravure printing machine. There are two main features of our water based ink printing machine: short heating oven(1.7~2m), and low heating tempreature(55~75ºC). These brings less printing film waste and much more energy saving. We have some successful case in China in our customer's factory. Welcome to inquiry about our water based ink printing machine.
Rotogravure Printing Machine for Water Based Ink Print
Model:OTY300EW rotogravure printing machine
Main parameters: