Article source address: http://
Lounge chairs Furniture
Lounge chairs furniture that means single chair, with rattan weaving design or aluminium frame design, lounge chair and make 1+1+1 set or L sectional sofa seating set. You can decorate your garden or home in many different ways.
Handwoven premium resin wicker UV resistant
Rust-resistant powder-coated frames
Cushions included with 30 density sofa foam
Versatile tempered glass tables
Cushions also available with 100% waterproof fabric.
outdoor lounge chairs furniture with different style and hand weaving
If you have any questions, please contact with us directly. Outdoor Sofa Furniture are produced
by Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome you can visit our Factory.For any inquiry,Please send mail directly to us.
Lounge Chairs Furniture,Modern Outdoor Furniture,Timber Outdoor Furniture,Wicker Outdoor Furniture Golden Eagle Outdoor Furniture Co., LTD. , https://www.geleisurefurnitures.com
How to print the color: listen to the secret of the 20-year captain
In the printing process, the easiest thing we can touch is to print black. How can we print black? Pay attention to the following points:
1. The printed black color is not even black if it is k100. It is because of the printing machine rubber - equipment, which is a common problem. Therefore, if it is monochrome (special color) printing, it can be printed twice, but if there is a shallow net in pure black, it will be 50-70% on the original basis. For example, if the shallow net is k60, then if it is printed twice It is necessary to adjust to k35 or so, it is best to have a standard proof for the printing master to adjust.
2, the black color of the four-color machine printing, must be added c30 in the design, but simply add a color from the side will be blu-ray, for the food industry, there is something wrong. Our experience: c60m60y40k100, such black is especially thick after the film.
3, some people may say, I want to print black is simply c100m100y100k100 is not blacker? No! ! ! That way there is no way to print. Because the paper has a maximum adsorption capacity of 300 for ink, that is, the sum of the four values ​​of cmyk cannot exceed 300! ! I am referring to a large area.
4. It is recommended to use high-quality paper when printing large areas of black, because good paper does not have so much paper ash when printing, otherwise it is easy to dirty. If the printing master is slightly careless, it will print a lot of dirty. point.
5, the pre-press design is also very important, when printing a large area of ​​black when using anti-white characters, do not use too small fonts, easy to paste.
6, in the black ink, you can add a little light blue. Printed like this, the color will be brighter.
To distinguish between different situations, reasonable operation according to samples, paper, and models. Multi-color machines include four-color printing and large-scale full-scale real ones. Generally, two sets of printing are arranged, and the last two units are used. In addition, it should be arranged according to the paper printing situation.