BD layout language application guide (2)

For long flat bodies, according to regulations, the font size in one direction is greater than or equal to the special number, and the font size in the other direction cannot be less than the special number. If there is an error in the matching of font size and grammatical errors during the sweep, it is not possible to double-swap and generate a large sample file. The used font size can break through the original regulations. In response to this kind of problem, we have only corrected other grammatical errors irrespective of the grammatical errors associated with the font size, and directly performed a second scan. The resulting large sample file layout can fully meet the requirements.

4. FQ annotation

FQ is best placed on the current line to avoid changing the layout and revising the starting point parameters.

When FQ adds "!" to the background, and there are shading, and if you do not use the borderline, if you use "W", the shading will be perpendicular to the division at the starting point and outside the division. Only by selecting "K" can the shading be within the zone. The sub-region can be re-partitioned. The calculation of the starting point and area size uses the concept of the current layer, taking the starting point of the current area as the starting point.

5. "a," and ", g," "○," and "φ"

At the time of sampling, the pinyin "" without any font specification is "a" and "g" is "". When the customer asks for "" or "g", some operators think that this type of font cannot be found on the keyboard table, and some use the A key of the Greek alphabet keyboard to enter the replacement character. In fact, to solve this problem is very simple, ", g" is a fine-grained foreign language annotation, and the system does not specify the external font is white by default, as long as you add the foreign language fine annotation.

The word "○" is often used in the headlines of newspapers and magazines with the advent of the 21st century. If the title font is a book typeface, use the multi-symbol keyboard to input “○”, it seems that there is nothing inconsistent; if the title font is in boldface or distorted blackbody, since the “○” entered with the multi-symbol keyboard cannot be turned into a blackbody, it is discharged. "" And so on, it looks very awkward. In fact, "○" is itself a word, and it has already been included in the supplementary Chinese character table of the Founder Electronic Publishing System, but many operators have not noticed it. The word module code is "9201".

Diameter is commonly referred to as "φ", and what is commonly seen in the press is "Ф" or "". "φ" is an out-of-disk symbol, which can be found in the off-disk symbol table. The input sample is "(())".

6. Explanation of the Word of a Female Mistake 〖HT〗

Since the specification does not describe the character code of a multi-body font, many people take different codes for the multi-body characters when making characters. In fact, women's misfortunes have separate storage areas for various fonts. When making a character, the same character code can be selected for multiple fonts of the same character. It is convenient to add the sample and make up the record, and it does not waste a limited number of characters and modules.

When making up the word, if the selected radical and whole word are scaled, their strokes will also follow the zooming. Thickening and thinning are more troublesome; however, they are not thickened or reduced, and the characters are not beautiful. Therefore, when choosing radicals, you should try to choose the same proportion of radicals, so that you can spell without spelling and look beautiful.

7. Status switching annotations

Although the usage of this annotation is simple, pay attention to its location. Cannot be used in the upper and lower annotations (SX), otherwise one sweep does not report SX nesting errors. When there is an italic font in the upper and lower annotations, it can only be added to the SX annotations. Add font annotations to the italics. When you use the upper and lower labels to solve "," they cannot be ranked before "," but only at the back or elsewhere. When mixing obliquely and obliquely, it can only be added before and after labeling "," before and after the label; it should be added to the italic font to add a font annotation, such as "Dmax is certain...", the sample is "Dmax certain..."; if the sample is "Dmax certain ...", then the typesetting result will be "D set...".

8. The use of leader characters

Leading characters are used not only in annotations, but also in writing to improve efficiency. Such as a book about trigonometric functions, the function name is a regular body, the function value is italicized, and the sin, cos, tg, etc. in the sample are replaced with the leading characters, which are \s, \c, and \t, respectively.

The width of the leading character is 20 characters, and the length of the character to be replaced far exceeds its width. Many people renounce the use of the leading characters. We do not think it is appropriate, because using leading characters can improve efficiency. When defining a leader character, leave the last two bits as another leader character. If the definition of this new leader character is not enough, it can also leave its last two as another leader character.
Source: "Printing Technology"